ASSEMBLE A PERSONAL COMPUTER (PC)

Step-by-step assembly of personal computers

To assemble a personal computer you can follow the following steps:

1. Take the motherboard and set the position of the connector "jumper", as written in the manual from the manufacturer. Unplug the connector plastic "jumper" between pin connector on the motherboard move to another position which connects the leg to the foot pin pin in accordance with the recommendations listed in the motherboard manual. Usually factory jumper mention certain positions according to the type of processor that will be used. Watch carefully so that you can achieve good results. Arrange connector "jumper" to suit our needs by following the user guide (manual) from the manufacturer. Adjust the position of the jumper with the type of processor that you will install. Setting the "jumper" enable motherboard provides precise electric power needs and in accordance with the installed processor. If one will result in faulty processor. If the Pentium 166 Mhz processor you want to use, consider whether the processor is coded 55C or 54C. Both require different power supply, one needs 3 volts and the other requires 3.4 volts.